Under Spin 101

Jig it, spin it, buzz it, if it's got a wire or a lead head, it can and will be discussed in here.
goldrod
Pro Angler
Pro Angler
Posts: 1952
Joined: Sat Jun 02, 2007 4:30 pm

Under Spin 101

Postby goldrod » Sun Oct 16, 2016 7:53 am

Try as I may I haven't caught nothin.
Which are you using, what's your setup and general retrieve? What baits are you using, just looking for the skinny to use as a starting point

smalljaw
Pro Angler
Pro Angler
Posts: 1941
Joined: Sun Feb 27, 2011 12:51 am
Location: East Centrl Pennsylvania

Re: Under Spin 101

Postby smalljaw » Sun Oct 16, 2016 9:06 pm

I've caught a few suspending fish in the warmer months but nothing consistent. Then 2 years ago I found where they really shine, at least in my waters, and that is in the cooler water. When the water is in the mid to upper 50s I have done well using a soft plastic swimbait on the head, then when the water gets in to the upper 40s to low 50s, a fluke jr. seems to work better. I found that heads with the blade closer to the soft plastic body work better for me, so much so I started making my own. The key seems to be reeling slow, if the blade is close to the body, you quickly find out how fast is too fast as the blade will contact the body, so you slow down until the blade spins freely and that, at least for me, seems to be the magic speed. When the water cools and I use the fluke trailer, I'll slow it down until I begin to feel the blade ticking the bottom, and that works really well as I've been able to put both numbers and large fish in the boat with it. The hardest part for me with the colder water was setting the hook, almost every fish seems to bite the same way, you feel the bump and set the hook and no fish so I learned that if I feel the bump and keep reeling until the rod tip loads up, that is when I pull back, very similar to reel setting, I believe the fish just grab the tail and then eat it, I don't know why but that is just how it has worked for me. Right now it is time for them, if the water is clear I'll start with a jerkbait, but if they don't come up for that the under spin almost always works and if the water is stained, I go right for the under spin, and so far that pattern hasn't failed me....Yet.

EDIT: I almost forgot, I use a 1/4oz bait in the colder water or if I'm in water shallower than 8' and a 3/8oz version when the water is at the warmest end of the spectrum, 58 degrees or so and only if the fish are in deeper water 10'+. I throw them on a 6'9" medium power spinning rod with an extra fast action on 8lb copoly line, for me the shorter rod allows me to keep better contact with the bit, a 7' rod is ok to but I feel like I have more control with a 6'9" but that is personal preference, I get more than enough distance on the cast so it isn't a factor.

goldrod
Pro Angler
Pro Angler
Posts: 1952
Joined: Sat Jun 02, 2007 4:30 pm

Re: Under Spin 101

Postby goldrod » Mon Oct 17, 2016 12:28 am

Do you think imx 843 is OK rod

smalljaw
Pro Angler
Pro Angler
Posts: 1941
Joined: Sun Feb 27, 2011 12:51 am
Location: East Centrl Pennsylvania

Re: Under Spin 101

Postby smalljaw » Mon Oct 17, 2016 5:33 am

goldrod wrote:Do you think imx 843 is OK rod


The MBR 843C, is that the rod? I prefer spinning for under spins but that rod would be about close to perfect for that technique.

goldrod
Pro Angler
Pro Angler
Posts: 1952
Joined: Sat Jun 02, 2007 4:30 pm

Re: Under Spin 101

Postby goldrod » Mon Oct 17, 2016 7:59 am

smalljaw wrote:
goldrod wrote:Do you think imx 843 is OK rod


The MBR 843C, is that the rod? I prefer spinning for under spins but that rod would be about close to perfect for that technique.


You are correct. I only use spinning for ds fishing when it is too windy for casting

TFOUR
Senior Angler
Senior Angler
Posts: 101
Joined: Sun Jul 19, 2015 10:26 am

Re: Under Spin 101

Postby TFOUR » Wed Oct 19, 2016 11:55 am

small jaw is pretty much spot on with everything he said. Under spins really shine in cold water conditions, I always throw on a medium action spinning rod 6-10. I use braid with a flouro leader and a little heavier line although we have much bigger bass here. Always 1/4 ounce in shallow water and bumping along the bottom. Bite is always exactly as smalljaw described, A lot of time I will pause my retrieve on the initial bite and start it and then set the hook.

User avatar
the hooligan
Pro Angler
Pro Angler
Posts: 1611
Joined: Sat Sep 01, 2012 11:25 am
Location: South Jersey

Re: Under Spin 101

Postby the hooligan » Wed Oct 19, 2016 9:37 pm

i slow roll the 3/16oz owner underspins with 4 inch keitech easy shiners. Pretty much fish it like a spinnerbait. Ive caught my largest fish the past few years with this setup.

If im in a jam, i grab the 1/4oz fish head spins from dicks sporting goods.

Real Pudd legend
Elite Angler
Elite Angler
Posts: 491
Joined: Tue Jan 22, 2008 11:52 pm

Re: Under Spin 101

Postby Real Pudd legend » Sun Oct 30, 2016 12:04 pm

In the past I mainly throw sworming hornet in 1-8 and 3/16 oz . Zoom super fluke jr. trailer . If the fish are schooling well and are in a shad spawn or just pushing bait I double them up and do very well. Biggest on the double is a 9.6 and a 5.4 lber , pretty awesome when it's on, if your doing just the single I like to slow roll and yo yo with a nice pop . You will get bit on the pop or the stop. Hope this helps ....


Return to “Jigs/Spinner/Buzzbaits”

Who is online

Users browsing this forum: No registered users and 3 guests